tel call at 008613167029626

email leave a message info@bearings-factory.com

banner
blog
home blog

blog

  • What Are Ball Bearings Made of?
    • Jul , 10 2020

    Bearings are the main components of mechanical equipment, and the produced materials used are different too. Deep groove bearings are the most common type of ball bearings. The basic type of deep groove ball bearings are composed of inner ring, outer ring, balls, cage, lubricant, mainly according to the different places of use, we can be roughly divided into four materials. Analysis of four common...

  • How To Identify Whether The Bearing Lubricant Has Deteriorated
    • Jul , 15 2020

    The bearing lubricating oil is dark black, rich in foam and has emulsified phenomenon. It is grinded with fingers without stickiness, astringency or odor. It is dark brown on the white test paper, and there are no yellow infiltration areas or black spots. If it is not replaced in time, it will accelerate the wear of parts, affect the service life, and even cause safety accidents. Therefore, it is ...

  • The Difference Between High-Speed Bearings And Low-Speed Bearings
    • Jul , 15 2020

    1. The basis for distinguishing between high-speed bearings and low-speed bearings: Because of the different ways of use, bearings can be divided into high-speed bearings and low-speed bearings, but although this is said, their distinction is not simply based on how many revolutions can be turned to count, and some low-speed bearings per minute The rotation speed can reach nearly tens of thousands...

  • How To Add Grease Into Ceiling Fan bBearings
    • Jul , 16 2020

    How to add grease to ceiling fan bearings? After three to five years of use of the household ceiling fan, if there is resistance or noise, it indicates that the bearing of the ceiling fan motor is worn or poorly smooth, and it should be treated hygienically and filled with smooth grease. When adding grease to the bearing, you need to disassemble the ceiling fan motor and then check the bearing wea...

  • How to Repair and Maintain Automobile Wheel Bearings?
    • Jul , 20 2020

    How to repair and maintain auto wheel bearings? Wheel bearings are important  parts of auto car. The hub axle is responsible for reducing the frictional resistance when the chassis is running and maintaining the normal driving of the car. If the hub bearing fails, it may cause noise, bearing heating, etc., especially the front wheel is more obvious, and it is easy to cause dangerous phenomena...

  • The Advantages of Ceramic Bearing ?
    • Jul , 24 2020

    The Advantages Of Ceramic Ball Bearings : 1. High speed: Ceramic bearings have the advantages of cold resistance, small force elasticity, high pressure resistance, poor thermal conductivity, light weight, and low friction coefficient. They can be applied to high-speed spindles at 12,000 rpm to 75,000 rpm and other high-speed spindles. Precision equipment; 2. High temperature resistance: ...

copyright © 2021 ZZ Bearing (Shanghai) Co., Ltd

top